EN 175301-803 style A square connector for electrovalves (former DIN 43650-A), ISO 4400, built-in gasket.
Technical Details
| Normative references |
EN 61984 |
| Housing type |
Free connector, female, non rewirable |
| Positions |
4 |
| Pitch |
18 mm |
| Fastening |
Screw M3x30 DIN 7985 Ph |
| Rated voltage |
250 Vac |
| Rated current, section 0,50 mm2 / AWG20 |
3 A |
| Rated current, section 0,75 mm2 / AWG18 |
5 A |
| Frequency |
50 / 60 Hz |
| Rated impulse voltage |
2,5 KV (EN 60664-1) |
| Overvoltage category |
II (EN 60664-1) |
| Pollution degree |
2 (EN 60664-1) |
| Degree of protection IP |
N.A. (to be tested with the counterpart) |
| Temperature range |
LLT – 20°C / ULT 90°C |
| Type of terminals |
Female — crimped |
| Connectable conductors |
Flexible cables |
| Insulation class |
I / II (depending the version) |
Test
| Dieletric strenght between: |
| Live parts and accessible external surface |
1500 Vac / 2mA / 60 sec (EN 60512-4-1) |
| Live parts and protective conductor |
1500 Vac / 2mA / 60 sec (EN 60512-4-1) |
| Insula on resistance between: |
| Live parts and accessible external surface |
500 Vdc / 20 MΩ / 60 sec (EN 60512-3-1) |
| Live parts and protective conductor |
500 Vdc / 20 MΩ / 60 sec (EN 60512-3-1) |
| Glow wire test |
850°C / 750°C (EN 60335-1) |
Cables
| Type |
H03V2V2-F (available also the IDC type) |
| Section |
0,50 mm2 – 0,75 mm2 |
Material Moulding
| External insulation |
PVC TM3 / UL 758 105°C |
| External insulation for LED model |
PVC TM3 transparent |
| Internal connector |
PA66 V0 RTI elec 140 |
Note
The models indicated are only an example, considered the various possibility of connections the connectors will evaluate according the customer needs
